win10只有c盘怎么分区,固态硬盘怎么分区

2020-12-16 阅读 出初柳整理

内容简介:如何在Solaris中添加或删除solaris中添加删除磁盘和分区磁盘和分区?我想让你先看看IDE和SCSI分配名。下面的示例是格式化主idemaster硬盘。在查看了IDE和SCSI分配名之后,我们知道了主idemaster硬盘...

如何在solaris中添加删除磁盘和分区

建意你先看 IDE 和 SCSI 分配名称

以下例子是格式化 Primary IDE Master 硬盘

查看 IDE 和 SCSI 分配名称后,我们知道 Primary IDE Master 硬盘名称是c0d0。

请先行 Login 成为 root user

# drvconfig ( configure the /devices directory )

# disks ( creates /dev entries for hard disks attached to the system )

# format

Searching for disks...done

AVAILABLE DISK SELECTIONS:

0. c0d0

/pci@0,0/pci-ide@7,1/ide@0/cmdk@0,0

1. c1t6d0

/pci@0,0/pci9004,8178@f/sd@6,0

Specify disk (enter its number): 0 ( 因为 Primary IDE Master 硬盘名称是c0d0,所以选择 0 )

AVAILABLE DRIVE TYPES:

0. other

Specify disk type (enter its number):0

( 正常应该是 0. DEFAULT 1. other,通常应该选择DEFAULT,但是Solaris不明白我的硬盘是什么,所

以只有other可供选择。)

我的IDE HardDisk架构如下:-

( 可以从BIOS Auto Detect查出?恚?ǔ6加?BA,LARGE,AUTO三种选择,建意你使用Auto,因?椴荒艽

过16Heads和不能大过63Sectoes )

Cylinders = 25232

Heads = 16

Sectors = 63

Enter number of data cylinders:25232

Enter number of alternate cylinders[2]:

Enter number of physical cylinders[25234]:

Enter number of heads: 16

Enter number of data sectors/track: 63

Enter rpm of drive[3600]:

Enter format time[default]:

Enter cylinder skew[default]:

Enter track skew[default]:

Enter tracks per zone[default]:

Enter alternate tracks[default]:

Enter alternate sectors[default]:

Enter cache control[default]:

Enter prefetch threshold[default]:

Enter minimum prefetch[default]:

Enter maximum prefetch[default]:

Enter disk type name (remember quotes): cyl 25232 alt 2 hd 16 sec 63

selecting c0d0

No current partition list

No defect list found

[disk formatted, no defect list found]

FORMAT MENU:

disk - select a disk

type - select (define) a disk type

partition - select (define) a partition table

current - describe the current disk

format - format and analyze the disk

fdisk - run the fdisk program

repair - repair a defective sector

show - translate a disk address

label - write label to the disk

analyze - surface analysis

defect - defect list management

backup - search for backup labels

verify - read and display labels

save - save new disk/partition definitions

volname - set 8-character volume name

! - execute , then return

quit

formatfdisk

No fdisk table exists. The default partition for the disk is:

a 100% "SOLARIS System" partition

Type "y" to accept the default partition, otherwise type "n" to edit the

partition table.

y

WARNING: Solaris fdisk partition changed - Please relabel the disk

formatfdisk

Total disk size is 25232 cylinders

Cylinder size is 1008 (512 byte) blocks

Cylinders

Partition Status Type Start End Length %

========= ====== ============ ===== === ====== ===

WARNING: no partitions are defined!

SELECT ONE OF THE FOLLOWING:

1. Create a partition

2. Specify the active partition

3. Delete a partition

4. Exit (update disk configuration and exit)

5. Cancel (exit without updating disk configuration)

Enter Selection: 1

Select the partition type to create:

1=SOLARIS 2=UNIX 3=PCIXOS 4=Other

5=DOS12 6=DOS16 7=DOSEXT 8=DOSBIG

9=DOS16LBA A=x86 Boot B=Diagnostic C=FAT32

D=FAT32LBA E=DOSEXTLBA 0=Exit? 1

Specify the percentage of disk to use for this partition

(or type "c" to specify the size in cylinders). 100

Should this become the active partition? If yes, it will be activated

each time the computer is reset or turned on.

Please type "y" or "n". n

Total disk size is 25232 cylinders

Cylinder size is 1008 (512 byte) blocks

Cylinders

Partition Status Type StartEnd Length %

========= ====== ============ ======== ====== ===

1Solaris1 2523125231 100

WARNING: no partitions are defined!

SELECT ONE OF THE FOLLOWING:

1. Create a partition

2. Specify the active partition

3. Delete a partition

4. Exit (update disk configuration and exit)

5. Cancel (exit without updating disk configuration)

Enter Selection: 4

WARNING: Solaris fdisk partition changed - Please relabel the disk

format partition

PARTITION MENU:

0 - change `0' partition

1 - change `1' partition

2 - change `2' partition

3 - change `3' partition

4 - change `4' partition

5 - change `5' partition

6 - change `6' partition

7 - change `7' partition

select - select a predefined table

modify - modify a predefined partition table

name - name the current table

print - display the current table

label - write partition map and label to the disk

! - execute , then return

quit

partition print

Current partition table (cyl):

Total disk cylinders available: 25229 2 (reserved cylinders)

Part Tag Flag Cylinders Size Blocks

0 root wm 0 0 (0/0/0) 0

1 swap wu 0 0 (0/0/0) 0

2 backup wu 0 - 25228 12.13GB (25229/0/0) 25430832

3 unassigned wm 0 0 (0/0/0) 0

4 unassigned wm 0 0 (0/0/0) 0

5 unassigned wm 0 0 (0/0/0) 0

6 usr wm 0 0 (0/0/0) 0

7 unassigned wm 0 0 (0/0/0) 0

8 boot wu 0 - 0 0.49MB (1/0/0) 1008

9 alternates wm 1 - 2 0.98MB (2/0/0)

partition 0 ( Part 2, 8, 9 是不需要进行任何修改)

Part Tag Flag Cylinders Size Blocks

0 root wm 0 0 (0/0/0) 0

Enter partition id tag[root]:

( 只可使用 unassigned, boot, root, swap, usr, backup, stand, var, home, alternates )

Enter partition permission flags[wm]:

( wm - read-write, mountable,wu - read-write, unmountable,rm - read-only, mountable,ru -

read-only, unmountable )

Enter new starting cyl[0]: 3 ( ? Part 8 - 9 可以看到Cylinders 0 - 2 已经给系统使用,所以要

由 3 开始 )

Enter partition size[0b, 0c, 0.00mb, 0.00gb]: ?

Expecting up to 25427808 blocks, 25226 cylinders, 12415.92 megabytes, or 12.12 gigabytes

Enter partition size[0b, 0c, 0.00mb, 0.00gb]: 25427808b

partition print

Current partition table (cyl):

Total disk cylinders available: 25229 2 (reserved cylinders)

Part Tag Flag Cylinders Size Blocks

0 root wm 3 - 25228 12.13GB (25226/0/0) 25427808

1 swap wu 0 0 (0/0/0) 0

2 backup wu 0 - 25228 12.13GB (25229/0/0) 25430832

3 unassigned wm 0 0 (0/0/0) 0

4 unassigned wm 0 0 (0/0/0) 0

5 unassigned wm 0 0 (0/0/0) 0

6 usr wm 0 0 (0/0/0) 0

7 unassigned wm 0 0 (0/0/0) 0

8 boot wu 0 - 0 0.49MB (1/0/0) 1008

9 alternates wm 1 - 2 0.98MB (2/0/0)

partition label

Ready to label disk, continue? y

partition quit

format label ( 为了保险所以输入多一次label )

Ready to label disk, continue? y

format quit

# newfs /dev/rdsk/c0d0s0 ( c0d0 是硬盘的名称,可参考IDE 和 SCSI 分配名称。s0 是 Part 0。

newfs: construct a new file system /dev/rdsk/c0d0s0: (y/n)? y

/dev/rdsk/c0d0s0: 25427808 sectors in 25226 cylinders of 16 tracks, 63 sectors

12415.9MB in 287 cyl groups (88 c/g, 43.31MB/g, 5504 i/g)

super-block backups (for fsck -F ufs -o b=#) at:

32, 88800, 177568, 266336, 355104, 443872, 532640, 621408, 710176, 798944,

887712, 976480, 1065248, 1154016, 1242784, 1331552, 1419296, 1508064, 1596832,

1685600, 1774368, 1863136, 1951904, 2040672, 2129440, 2218208, 2306976,

2395744, 2484512, 2573280, 2662048, 2750816, 2838560, 2927328, 3016096,

3104864, 3193632, 3282400, 3371168, 3459936, 3548704, 3637472, 3726240,

3815008, 3903776, 3992544, 4081312, 4170080, 4257824, 4346592, 4435360,

4524128, 4612896, 4701664, 4790432, 4879200, 4967968, 5056736, 5145504,

5234272, 5323040, 5411808, 5500576, 5589344, 5677088, 5765856, 5854624,

5943392, 6032160, 6120928, 6209696, 6298464, 6387232, 6476000, 6564768,

6653536, 6742304, 6831072, 6919840, 7008608, 7096352, 7185120, 7273888,

7362656, 7451424, 7540192, 7628960, 7717728, 7806496, 7895264, 7984032,

8072800, 8161568, 8250336, 8339104, 8427872, 8515616, 8604384, 8693152,

8781920, 8870688, 8959456, 9048224, 9136992, 9225760, 9314528, 9403296,

9492064, 9580832, 9669600, 9758368, 9847136, 9934880, 10023648, 10112416,

10201184, 10289952, 10378720, 10467488, 10556256, 10645024, 10733792,

10822560, 10911328, 11000096, 11088864, 11177632, 11266400, 11354144,

11442912, 11531680, 11620448, 11709216, 11797984, 11886752, 11975520,

12064288, 12153056, 12241824, 12330592, 12419360, 12508128, 12596896,

12685664, 12773408, 12862176, 12950944, 13039712, 13128480, 13217248,

13306016, 13394784, 13483552, 13572320, 13661088, 13749856, 13838624,

13927392, 14016160, 14104928, 14192672, 14281440, 14370208, 14458976,

14547744, 14636512, 14725280, 14814048, 14902816, 14991584, 15080352,

15169120, 15257888, 15346656, 15435424, 15524192, 15611936, 15700704,

15789472, 15878240, 15967008, 16055776, 16144544, 16233312, 16322080,

16410848, 16499616, 16588384, 16677152, 16765920, 16854688, 16943456,

17031200, 17119968, 17208736, 17297504, 17386272, 17475040, 17563808,

17652576, 17741344, 17830112, 17918880, 18007648, 18096416, 18185184,

18273952, 18362720, 18450464, 18539232, 18628000, 18716768, 18805536,

18894304, 18983072, 19071840, 19160608, 19249376, 19338144, 19426912,

19515680, 19604448, 19693216, 19781984, 19869728, 19958496, 20047264,

20136032, 20224800, 20313568, 20402336, 20491104, 20579872, 20668640,

20757408, 20846176, 20934944, 21023712, 21112480, 21201248, 21288992,

21377760, 21466528, 21555296, 21644064, 21732832, 21821600, 21910368,

21999136, 22087904, 22176672, 22265440, 22354208, 22442976, 22531744,

22620512, 22708256, 22797024, 22885792, 22974560, 23063328, 23152096,

23240864, 23329632, 23418400, 23507168, 23595936, 23684704, 23773472,

23862240, 23951008, 24039776, 24127520, 24216288, 24305056, 24393824,

24482592, 24571360, 24660128, 24748896, 24837664, 24926432,25015200,

25103968, 25192736, 25281504, 25370272,

现在打算把 /dev/rdsk/c0d0s0 mount 在 /mnt/newhd

# cd /mnt

# mkdir newhd

在 /etc/vfstab Auto mount 的设定

device to mount = /dev/dsk/c0d0s0

device to fsck = /dev/rdsk/c0d0s0

mount point = /mnt/newhd

FS type = ufs

fsck pass = 1

mount at boot = yes

mount options = -

# pico vfstab or vi vfstab

加入 /dev/dsk/c0d0s0 /dev/rdsk/c0d0s0 /mnt/newhd ufs 1 yes -

# mount /mnt/newhd

完成 !

Good luck!

作者给您推荐的内容
  1. 1Win10本身在根磁盘上不占用太多空间。不到20g,但升级时会造成上一个预览版的残留。特别是,最近的版本变化很大,基本上都是新安装的,所以会自动生成windows.旧版回退目录。2这个目录也安装...

  2. 支付宝是一个流行的第三方支付平台,为大家提供电子支支付宝中怎么开通和查看身份证网证/电子证件付服务。使用过支付宝的朋友都知道,支付宝深受广大用户的喜爱。但是,很多朋友还是不知...

  3. 建议将原始霹雳卸载到http:本页要下载迅雷7最新版本的安迅雷7一直不断重启这是什么原因?装包,请在另一个磁盘上重新安装以尝试。(请不要覆盖安装,必须卸载并重新安装,否则旧问题可能会被...

  4. 支付宝是我们经常使用的支付软件之一。今天小编就告诉大家如何开通支付宝手机手机支付宝怎么开通余利宝?怎么将余额转入余利宝,如何将余额转入余力宝。具体如下:1。首先我们在手机上打...

  5. 联想y50-70am-ifi继续保持小Y系列的硬朗风格。联想Y50-70AM-IFI这台机器的设计不仅更轻,而且功能更强大。新款gtx860m高性能独立显卡在游戏中发挥了出色的作用。目前,这台机器正在营业...

  6. 请检查一下DNT.配置dbtype节点database请检查DNT.config中的DbType节点数据库类型是否正确例如:SqlServer的访问MYSQL type in是否正确,例如:sqlservers,access,MySQL Description:当前web请求执行过程中发生未处理的...

  7. 1可能有短信屏蔽软件。[打开手机安全软件,暂时关闭屏蔽功能,然后再尝试获取验证码。在投诉之前,短信可微博短信验证收不到的原因能被视为垃圾邮件。三。解决方案:每天只能免费获得两次...

  8. 文泰雕刻可以在各种物体文泰刻绘怎么排版文泰雕刻文字排版步骤详细教程上雕刻各种文字和图形,并支持文本块的排版和编辑。适用于市场上大多数雕刻机、雕刻机、激光机等设备。下面小编将...

  9. win10移动系统的蓝牙认证支持再次升级,是关于win10移动即将一周年的升级系统。这次更新Win10Mobile一周年更新蓝牙认证解析:控制手机暂停和播放音乐等和去年的蓝牙认证有两个不同之处。一是音视...

  10. 当手机使用网易云音乐听歌时,锁屏屏保自动变成网易云音乐。如何关闭网易云音乐的锁屏歌词?让我们看看详细的教程。1进入网易云音乐后,点击左上角三条横线进入功能页面。2在功网易云音乐...